Remote Power Brake Booster Kit, 1941-1966, Willys and Jeep

Looking for power brakes and more stopping power? Check out our remote power brake booster kit. Most customers typically mount these on the driver side inner fender as seen in out photos. The main line in the front of the slave cylinder will tee into your front metal lines and the smaller line on the side of the slave cylinder needs to tee into the "Y" fitting at the master cylinder. Please note, this does not connect directly to your master cylinder and it is intended to be mounted remotely. Here is a YouTube video of a similar installation: https://youtu.be/OUZ6c5v4AwM?si=Fny_2xfSiTcb-gwM

Do not buy this if you can't bend or flare brake lines.

This kit includes everything you need to remotely add power brakes to your vintage Willys Jeep. With frame mounted master cylinders there isn't enough room to add power brakes but this kit allows you to mount the booster remotely. This is a compact 7" booster that is capable of producing over 800 psi of fluid pressure to your master cylinder. This kit also produces enough vacuum to run vacuum to operate vacuum wipers if you have a vacuum wiper equipped vehicle. This is an excellent addition to our disc brake kits. This will only fit single reservoir master cylinders. Do not buy this if you can't bend or flare brake lines.  Fits:

• MB and GPW (1941-1945)
• CJ-2A (1948-1949)
• CJ-3A (1948-1953)
• CJ-3B (1953-1968) 
• CJ-5 (1955-1965)
• CJ-6 (1955-1965)
• Willys Pickup (1947-1965) 
• Willys Station Wagon (1946-1964)
• Willys Sedan Delivery (1948-1963)
• Willys Jeepster (VJ) (1948-1950)
• Willys FC-150 (1956-1964)
• Willys FC-170 (1957-1964)
• M38 (1950-1952)
• M38A1 (1952-1966)